Lanyard wire support Design
Self lubricating material & longer bearing length of the Lanyard wire support (LWS) carrier allows conventional PVC coated lanyard wire or pull cable to slide freely. This greatly improves the efficiency of the system and ensures compliance with AS1755 while also extending the life of the lanyard. All threaded rods, nuts and washers are either stainless steel or galvanised for longer life. Standard lengths available are 100, 150, 200, 250 & 300mm from the centre of the wire carrier to the end of the threaded rod. Each unit is supplied fitted with two nuts, a spring washer and a flat washer to assist installation. Bolts are offered to allow direct mounting to the conveyor structure.
Bolt lengths are 20mm to 35mm supplied in 304 Stainless Steel complete with flat & spring washers.
The LWS wire carrier is injection moulded. Moulded re-enforcement of the wire carrier and the engineered overhanging tongue allow the LWS to be mounted in any orientation without allowing the lanyard to become displaced. The threaded rod has no imperfections and with the nuts and washers fitted, the installer can be assured of correct installation and adjustment.
Wire Carrier: Made from a flame retardant copolymer polypropylene compound providing good impact strength, rigidity and UV stability.
Threaded Rod: Galvanised 10mm machine rod or 304 stainless steel are standard. Extended length rods are available at additional cost.
Flame Retardant / UV Stable / Anti static: as stadium seating and outdoor electrical enclosures. The compound has been developed to meet the requirements of the UL 94 V-2 rating and the AS/NZS 60695.2.12:2001 (9600C glow wire test) whilst providing good impact strength and rigidity. Anti Static tested to AS/NZS 60079-0;2012
The LWS is designed to be mounted via metal bolts or rods to conveyor structures. The LWS is also date stamped to provide whole of life traceability. Designed to allow lanyard wire or pull cable,to be clipped into the LWS. Once installed, the lanyard cannot be removed without intentional intervention of maintenance staff.
Lanyard wire support Material
The LWS is made from a flame retardant copolymer polypropylene compound which is UV stabilized for extended outdoor weathering and is commonly used in outside applications such as stadium seating and outdoor electrical enclosures. The compound has been developed to meet the requirements of the UL 94 V-2 rating and the AS/NZS 60695.2.12:2001 (9600C glow wire test) whilst providing good impact strength and rigidity.
The recent addition to the LWS system is LWS11. The LWS11 is to suit larger signal line cables for non-tension systems. the larger opening on the allows cables of 13mm nominal diameter to be installed.