|
FEATURES
HIGH DIELECTRIC STRENGTH
Can be used for all electrical connections.
SPECIALLY COMPOUNDED, SYNTHETIC SILICONE ELASTOMER
Resistant to oil, water, ozone, and many chemicals. Wide temperature range from -51º C to +205º C.
VULCANIZES IMMEDIATELY
Requires no heat – becomes fully bonded in 24 hours at room temperature. Remains pliable over time.
NO ADHESIVES – ADHERES ONLY TO ITSELF
Easy to remove – leaves no residue. Covered ttings are immediately reusable.
TRIANGULAR SHAPE WITH COLOR GUIDELINE
Allows even thickness for uniform high dielectric strength.
STRETCHES TO APPROXIMATELY 2-1/2 TIMES ITS LENGTH
Conforms to irregular shapes and uneven surfaces. Can be used on parts which move or vibrate.
WIDTH 1” (25.4mm)
Covers more surface than ordinary tape with a single wrap.
SPECIFICATIONS
Meets U.S. Military Spec. MIL-I-46852, superseded by CID A-A-59163.
Dielectric Strength:
(Per ASTM D-149): 300 volts per mil (0.025mm) of fi nished wrap thickness for 40 mil(1mm)
Tensile/break Strength:
(Per ASTM D-412): 700 PSI (4,826 kpa) Min.: 17 lbs (7.7 kg). for 40 mil (1mm)
Elongation:
(Per ASTMD-412): 300% minimum.
Radiation Resistance:
Maintains exibility when exposed to Gamma Radiation.
Shelf Life:
Product should be stored at 90°F (32°C) or less for maximum shelf life. Store in original packaging in clean dry environment when not in use.
Product Limitation:
Vulko-Wrap has a low abrasion and cut resistance. A protective over wrap is recommended for applications exposed to dragging or impact.
|