R&D Technology
Site Search R&D Technology Customer Extranet


Proudly Australian Made to Suit Australian conditions


  • Absolute simplicity in initial setup and adjustment.
  • Robust non-metallic enclosure.
  • Simple design ensures low maintenance.
  • Stainless steel internal compression type springs.
  • Pull rods 316 stainless steel.
  • Pull rods have external dust protecting boots for seal protection.
  • Double lip oil seals on pull rods and reset operator for secure dust and weather protection to IP 67.
  • Non-metallic pull rod bushings.
  • Positive drive action from cams through to switching contacts provides mechanical forcing of the trip contacts.
  • Internal switch connections are fully shrouded for added safety during inspection.
  • Switches have double make double break silver contacts for reliable low voltage signalling.
  • Cam design compensates for pull wire expansion/contraction up to 30mm either side of the set point.
  • Eliminates nuisance tripping due to vibration.
  • Padlock facility provided as standard.
  • tested to the requirements of AS 1755 - 2000 

Pull Wire Switch Operation

Tripping occurs under the following conditions:–
(a) One or both trip wires are removed
(b) One or both trip wires are over-tensioned
(c) One or both trip wires are activated
(d) Manual trip via reset knob.

The switch cannot be reset unless both trip wires are attached and correctly tensioned. Manual reset via the external reset knob is required after a trip has occurred.

Pull wire Switch

also referred to as a lanyard switch, conveyor belt switch, rope switch, belt pull switch, trip wire switch.

Product Code: STP-M-C-2

Contact Sales Department
R and D Technology Files
R and D Technology


� Copyright R&D Technology Pty Ltd | Sitemap | Disclaimer | Privacy | Web Design Newcastle Redback Solutions